Internally Relieved Body Bolt
A51C43592-19
(NSN) National Stock Number
5306-00-006-4599
Federal Supply Classification
5306 Bolts
Item Name Code
06676
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.247 inches maximum thread length, 2.088 inches minimum and 2.098 inches maximum fastener length, hexagon head style, 0.110 inches minimum and 0.150 inches maximum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
An externally threaded fastener whose external threaded portion is of one nominal diameter. It has a concentric hole along the longitudinal centerline which may extend a part or the full length of the bolt. The concentric hole along the centerline may be counterbored and/or internally threaded at the head end or the bolt end. The head is designed to be held or driven by an external and/or internal driver. For items having a hole(s) perpendicular to the axis which meet the concentric hole along the longitudinal centerline, see bolt, fluid passage.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06676 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.247 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
2.088 inches minimum and 2.098 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.110 inches minimum and 0.150 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.740 inches minimum and 0.752 inches maximum
Details
None.Shoulder Diameter
0.4995 inches minimum and 0.5000 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Shoulder Length
1.737 inches minimum and 1.747 inches maximum
Details
The length of the enlarged portion/s/ located on the shank of the item.Shank Unthreaded Hole Diameter
0.106 inches minimum first hole and 0.116 inches maximum first hole
Details
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.Concentric Hole Depth
1.620 inches nominal
Details
None.Concentric Hole Diameter
0.249 inches minimum and 0.255 inches maximum
Details
None.Nominal Thread Diameter
0.375 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
24
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Hardness Rating
39.0 rockwell c minimum overall and 45.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Distance From Head Largest Bearing Surface To Shank Hole Center
1.968 inches minimum first hole and 1.978 inches maximum first hole
Details
The distance from the shank hole centerline to the largest bearing surface of the head.Material
steel comp 410 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
passivate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
concentric hole unthreaded
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-i6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Thread Series Designator
unjf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| A51C43592-19 | 61174 | 1 | - | 3 | 9 | - | KE |
| A51C43592-19 | 26512 | 1 | - | 5 | 9 | - | KE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified sales team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
NORTHROP GRUMMAN SYSTEMS CORPORATION
CAGE: 79RG9
JACKSONVILLE
, FL
, 32221-8130
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-006-4599
What is the NIIN of the NSN 5306-00-006-4599?
The National Item Identification Number (NIIN) of the NSN 5306-00-006-4599 is 00-006-4599
When the NSN 5306-00-006-4599 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Jun 23, 1972
Does the NSN 5306-00-006-4599 contain any precious metals?
Type/content is unknown
Does the NSN 5306-00-006-4599 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products