Hexagon Castellated Plain Nut
5310PL0145194
(NSN) National Stock Number
5310-00-006-4720
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
01854
Schedule B Code
7318160000
Summary
3b thread class, right-hand thread direction, castellated, hexagon nut style, 0.406 inches nominal nut height, 0.553 inches minimum and 0.564 inches maximum width across flats, unf thread series
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 9 | - | - | 6 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | WP |
Identification
A nut having 6 flat sides, flat on the bottom and having a slotted cylindrical or dome shaped upper portion. It is designed to provide positive locking when used with a solid or split (cotter) pin. Excludes:nut (1), plain, slotted, hexagon.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01854 | A021A0 | 1 | 1 |
Specifications
Thread Class
3b
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Nut Style
castellated, hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.Nut Height
0.406 inches nominal
Details
None.Width Across Flats
0.553 inches minimum and 0.564 inches maximum
Details
The shortest straight line between flats,perpendicular to the height.Thread Series
unf
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Quantity Per Inch
24
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Hardness Rating
19.0 rockwell c minimum and 26.0 rockwell c maximum
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Nominal Thread Size
0.375 inches
Details
A designation that is used for the purpose of general identification of the thread.Countersink Angle
90.0 degrees nominal nut
Details
The included angle of the countersink.Criticality Code Justification
feat
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Bearing Surface Type
washer faced
Details
Indicates the type of bearing surface.Bearing Surface Finish
63.0 microinches
Details
Designates the specific roughness rating of the bearing surface,representing the arithmetic average deviation of the surface from the meanline in profile.Special Features
critical features, tolerances, fit restrictions, material properties andmanufacturing process.
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 8740 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 6322 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium and chromium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Surface Treatment Document And Classification
ams 2400 assn std single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Departure From Cited Designator
material must conform to ships parts control center special quality control provisions
Details
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| AN121554 | 88044 | 4 | - | 4 | 1 | - | HX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified sales team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX
CAGE: 9009H
NO CITY
, KUJAWSKO-POMORSKIE
, NO CODE
POLAND
View Products
FAQs
Frequently asked questions for NSN 5310-00-006-4720
What is the NIIN of the NSN 5310-00-006-4720?
The National Item Identification Number (NIIN) of the NSN 5310-00-006-4720 is 00-006-4720
When the NSN 5310-00-006-4720 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Jun 21, 1972
Does the NSN 5310-00-006-4720 contain any precious metals?
Does not contain precious metal
Does the NSN 5310-00-006-4720 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products