Lock Washer
470211
0.114 inches minimum and 0.122 inches maximum hole diameter, 0.175 inches minimum and 0.180 inches maximum outside diameter, 0.021 inches minimum and 0.041 inches maximum material thickness, copper alloy overall material, nickel overall surface treatment, split helical-right hand style designator
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | XX |
A washer, usually round, with a centrally-located hole. Its edges and two bearing surfaces are designed in such a way that applied pressure brings into play the spring tension and/or frictional locking principle that materially resists any tendency toward turning. It may be made of one or two pieces.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 14218 | A022B0 | 1 | 1 |
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Details
A measurement of the smallest dimension of the material,in distinction from length or width.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 470211 | 21921 | X | - | 3 | 9 | - | XX |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 55210 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified sales team
- Counterfeit Parts Prevention
- 100% Product Inspections
What is the NIIN of the NSN 5310-00-261-7641?
When the NSN 5310-00-261-7641 was assigned to the Federal Catalog?
Does the NSN 5310-00-261-7641 contain any precious metals?
Does the NSN 5310-00-261-7641 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.