Plate

An/alq-119 end item identification

An/alq-119 end item identification

15 component quantity, o-ring, 9; leather backup ring, 2; backup ring, 1; gasket, 3 nonsupply items and quantities

15 component quantity, o-ring, 9; leather backup ring, 2; backup ring, 1; gasket, 3 nonsupply items and quantities

J-85-ge series turbojet engines end item identification, engine usage design, sling, tipover engine , to 2j-j85-94 reference data and literature

10.000 inches overall length, bolted attachment method, aircraft mooring usage design, steel material, steel material

10.000 inches overall length, bolted attachment method, aircraft mooring usage design, steel material, steel material

Dolly, lift, aircraft landing gear, a frame type; 71 to 26 inch wide, 36 inch long with 46 inch boom, with towbar

C-130 acft support end item identification, ballast assembly, nose landing gear

Aircraft rudder usage design

2.313 inches overall height, pin attachment method, 1.500 inches overall diameter

1730-00-854-2236 end item identification, steel 3.000 in. Long by 0.500 in. Wide disc at one end, other end steel stem 44.500 in. Lg, 0.781 in. Dia with two holes 0.310 in. Dia in line

Engine usage design

Engine usage design

9.000 inches diameter, 4.000 inches thickness, oil cooling exhaust on model 852 acft specific usage design, cotton fabric basic material

Cocpit encloosure specific use

Rudder installation kit end item identification, c/o bracket angle 8 x 6 x 3/4 l x 4; angle 3/8 x 2 1/2 x 6 1/2 (2ea) ; (1ea) 3/4-10 x 4 hex bolt; (2ea) 3/4-10 hex nut; (2ea) 3/4 i.D. Washer functional description

8.500 inches overall height, 12.000 inches overall diameter, f100-pw-229 engine end item identification, mask, shotpeen, number 4 airseal

Ah-64 apache attack helicopter end item identification, rigging kit

Sh-60b electronics helicopters end item identification, name on drawing is work surface assembly flir

F100-pw-229 engine end item identification, 3.700 inches nominal overall height, serd name: fixture; aluminum material; rests on pwa57830 during use

Aah micom managed subsystems, other missile related materiel end item identification

28.000 inches overall length, 25.000 inches overall height, 12.000 inches overall width, pacer special end item identification

29.000 inches overall length, 11.000 inches overall height, 19.300 inches overall width, pacer special end item identification

Pacer special end item identification, used during aircraft component repair or maintenance functional description, serd no. 2446 reference data and literature

Next assy p/n 40015-10; used on an/aqh-4a (v2) test program set end item identification

Used to install the splined adapter on a starter-generator gearshaft

F-16 aircraft end item identification, model 8004 , used as a test stand for the jet fuel starter functional description, company item name-jet fuel starter test stand supplementary features

P/n74d290500-1001; f/a-18e/f adapter acft mooring end item identification, 9.820 inches nominal overall length, 3.000 inches nominal overall width

P/n74d290500-1001; f/a-18e/f acft adapter acft mooring end item identification, 2.500 inches nominal overall length, 4.000 inches nominal overall width

C-40 support equipment end item identification

Advanced technologies & oceanic procedures (atops) end item identification, chassis, channel select switch, sa-16

Advanced technologies & oceanic procedures (atops) end item identification, chassis, channel select switch, sa-16

21.188 inches overall length, 18.000 inches overall height, 1.375 inches overall width, plasma low profile wall mount (plp) , quick disconnect mounting system adjustable between 0

Subis well junction box unit 5 end item identification, well junction box assembly, type 188 periscope

Hyd pressure end item identification, holding digital pressure indicator which measures pressure , flat type

Hyd pressure end item identification, holding digital pressure indicator which measures pressure , flat type

Hyd pressure end item identification, holding digital pressure indicator which measures pressure , flat type

Break-out box assembly

Cable cord for marking machine end item identification, regular

Cable cord for marking machine end item identification, regular

Cable cord for marking machine end item identification, regular

Cable cord for marking machine end item identification, regular

0.375 inches second end outside diameter, any acceptable first end conduit type accommodated, phot mast, esm end item identification

0.375 inches second end outside diameter, any acceptable first end conduit type accommodated, phot mast, esm end item identification

0.375 inches second end outside diameter, any acceptable first end conduit type accommodated, phot mast, esm end item identification

2.000 inches overall length, 0.375 inches second end outside diameter, any acceptable first end conduit type accommodated, roller assy end item identification

2.000 inches overall length, 0.375 inches second end outside diameter, any acceptable first end conduit type accommodated, roller assy end item identification

2.000 inches overall length, 0.375 inches second end outside diameter, any acceptable first end conduit type accommodated, roller assy end item identification

2.000 inches overall length, 0.750 inches second end outside diameter, any acceptable first end conduit type accommodated, phot mast, esm end item identification

2.000 inches overall length, 0.750 inches second end outside diameter, any acceptable first end conduit type accommodated, phot mast, esm end item identification

2.000 inches overall length, 0.750 inches second end outside diameter, any acceptable first end conduit type accommodated, phot mast, esm end item identification

0.750 inches second end outside diameter, any acceptable first end conduit type accommodated, phot mast, esm end item identification

0.750 inches second end outside diameter, any acceptable first end conduit type accommodated, phot mast, esm end item identification

0.750 inches second end outside diameter, any acceptable first end conduit type accommodated, phot mast, esm end item identification

15.970 inches overall depth, 2.375 inches overall height, 10.730 inches overall width, ueu sra otps end item identification, aluminum alloy 2024 material

3a thread class, right-hand , 0.694 inches thread length, 1.491 inches fastener length, dished hexagon head style, 0.219 inches head height

3a thread class, right-hand , 0.440 inches thread length, 4.375 inches fastener length, hexagon head style, 0.136 inches head height

3a thread class, right-hand , 0.974 inches thread length, 5.053 inches fastener length, double hexagon w/hole head style, 0.711 inches head height

3a thread class, right-hand , 0.974 inches thread length, double hexagon w/hole head style, 0.711 inches head height, 0.582 inches width between flats

Support of pre-provisioning items for which navicp phil acts as poe (e-nsn isil) end item identification, agav criticality code justification

Support of pre-provisioning items for which navicp phil acts as poe (e-nsn isil) end item identification, agav criticality code justification

Support of pre-provisioning items for which navicp phil acts as poe (e-nsn isil) end item identification, agav criticality code justification

3a thread class, right-hand , 0.370 inches thread length, 3.370 inches fastener length, dished hexagon head style, 0.125 inches head height

3a thread class, right-hand , 0.425 inches thread length, 6.035 inches fastener length, dished hexagon head style, 0.125 inches head height

Bolt, machine end item identification, kit, disposable bolt

Zzzy criticality code justification, lockwasher , material will be in accordance with navicp activity hx quality control, manufacturing reference number differentiating characteristics

Zzzy criticality code justification, lockwasher , material will be in accordance with navicp activity hx quality control, manufacturing reference number differentiating characteristics

Zzzy criticality code justification, material will be in accordance with navicp activity hx quality control, manufacturing reference number differentiating characteristics

H46 end item identification, flt control washer

2b thread class, right-hand , prevailing torque with nonmetallic insert locking feature, hexagon nut style, 0.219 inches nut height

U-2 end item identification

U-2 end item identification

U-2 end item identification

2b thread class, right-hand , prevailing torque with nonmetallic insert locking feature, hexagon nut style, 0.464 inches nut height

2b thread class, right-hand , prevailing torque with nonmetallic insert locking feature, hexagon nut style, 0.464 inches nut height

Mrap rg-33 end item identification, flat washer , steel material, astm f844, uns g10050, 10060, 10080, 10080, 10100, 110, 120, 130, 150 assn std single material response material document and classification

1.000 inches overall length, 95.00 ohms impedance electrical resistance, circuit card assy for low task filter board, 4241242-501 end item identification

1.700 inches overall length, 95.00 ohms impedance electrical resistance, circuit card assy for low task filter board, 4241242-501 end item identification

1.100 inches overall length, 95.00 ohms impedance electrical resistance, circuit card assy for low task filter board, 4241242-501 end item identification

French army end item identification, bigfoot rapid deployment cable

0.750 inches overall length, 95.00 ohms impedance electrical resistance, circuit card assy for low task filter board, 4241242-501 end item identification

1.800 inches overall length, 95.00 ohms impedance electrical resistance, circuit card assy for low task filter board, 4241242-501 end item identification

Round cross-sectional shape style, 0.270 feet overall length, 50.00 ohms impedance electrical resistance, circuit card assy used on transmitter p/n 4240908-502 end item identification

A/n-fsq 225 end item identification, cable assembly, special purpose

Round cross-sectional shape style, 50.00 ohms impedance electrical resistance, dual directional de, p/n 4241021-501 (93346) end item identification

Round cross-sectional shape style, 50.00 ohms impedance electrical resistance, predriver, aircraft, p/n 4240914-501 (81349) end item identification

Right-hand , 0.375 inches fastener length, hexagon head style, ground screw, four way slotted , steel screw material, thread size: 10-32; for ground number 32 to number 10 awg wire

Right-hand , 0.375 inches fastener length, hexagon head style, ground screw, four way slotted , steel screw material, thread size: 10-32; for ground number 32 to number 10 awg wire

Right-hand , 0.375 inches fastener length, hexagon head style, ground screw, four way slotted , steel screw material, thread size: 10-32; for ground number 32 to number 10 awg wire

2410-01-565-2603, tractor, full tracked, low speed end item identification, screw-pan head , nha-224-9450 operator station-control gp-handle supplementary features

3a thread class, right-hand , 1.063 inches thread length, 1.047 inches fastener length, hexagon head style, 0.156 inches head height

3a thread class, right-hand , 0.672 inches thread length, 0.734 inches fastener length, hexagon head style, 0.105 inches head height

2590-01-579-4990; gen iii mine roller system end item identification, screw, cap, hex, head

0.062 inches fastener length, 0.306 inches head diameter, 0.085 inches head height, 0.045 inches hole diameter, slot internal drive style

2410-01-565-2603, tractor, full tracked, low speed end item identification, screw , nha-224-9450 operator station, control gp-handle supplementary features

2410-01-565-2603, tractor, full tracked, low speed end item identification, screw-button hd , nha-224-9450 operator station, control gp-handle supplementary features

3a thread class, right-hand , 0.250 inches nominal thread diameter, 28 thread quantity per inch, steel material, astm a574 assn std single material response material document and classification

Unmanned aerial vehicle end item identification, 6-32, .875, spinner backplate bolts, (block d v2 only)