Tee Head Bolt
4036813
(NSN) National Stock Number
5306-00-434-0124
Federal Supply Classification
5306 Bolts
Item Name Code
06668
Schedule B Code
7508900000
Summary
3a thread class, right-hand thread direction, 0.265 inches minimum and 0.378 inches maximum thread length, 0.865 inches minimum and 0.885 inches maximum fastener length, tee no. 6 head style, 0.125 inches minimum and 0.135 inches maximum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | SB |
Identification
An externally threaded fastener whose threaded portion is of one nominal diameter and with a head specially designed to fit in a slot and hold against turning.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06668 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.265 inches minimum and 0.378 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
0.865 inches minimum and 0.885 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
tee no. 6
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.125 inches minimum and 0.135 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Head Length
0.420 inches minimum and 0.440 inches maximum
Details
A measurement of the longest dimension of a head,in distinction from width.Width Between Flats
0.310 inches minimum and 0.320 inches maximum
Details
None.Nominal Thread Diameter
0.190 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
32
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
175000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Hardness Rating
34.0 rockwell c minimum overall and 44.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Minimum Yield Strength
115000 pounds per square inch
Details
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.Chamfer Angle
45.0 degrees minimum and 47.0 degrees maximum
Details
The included angle of the chamfer(s).Special Features
undercut shank under head 0.300 in. min 0.320 in. max lg by 0.165 in. min. 0.175 in. max dia,shoulder 0.310 in. from head 0.187 in. min 0.207 in. max lg by 0.225 in. min 0.227 in. max dia
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
nickel alloy overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5708 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Thread Series Designator
unjf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 4036813 | A1387 | 5 | - | 5 | 2 | - | MB |
| 4036813 | 27238 | 5 | - | 3 | 2 | - | MB |
| 4036813 | 98524 | 5 | - | 5 | 2 | - | MB |
| 4036813 | 11449 | 2 | - | 5 | 9 | - | SB |
| 4036813 | 01060 | 5 | - | 5 | 9 | - | MB |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 70220 | - | M | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified sales team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY
CAGE: 77445
EAST HARTFORD
, CT
, 06118-3811
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-434-0124
What is the NIIN of the NSN 5306-00-434-0124?
The National Item Identification Number (NIIN) of the NSN 5306-00-434-0124 is 00-434-0124
When the NSN 5306-00-434-0124 was assigned to the Federal Catalog?
It was assigned 50 years ago, on Fri, May 17, 1974
Does the NSN 5306-00-434-0124 contain any precious metals?
Type/content is unknown
Does the NSN 5306-00-434-0124 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products