Shouldered Washer
114H4049-1
(NSN) National Stock Number
5310-00-073-6601
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
15934
Schedule B Code
-
Summary
0.689 inches minimum and 0.691 inches maximum hole diameter, 1.0615 inches minimum and 1.0635 inches maximum shoulder diameter, 1.175 inches minimum and 1.185 inches maximum outside diameter, 0.042 inches minimum and 0.052 inches maximum shoulder height, 0.068 inches minimum and 0.088 inches maximum material thickness, aavh criticality code justification
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
A washer, round in shape, and having a centrally located hole. One bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. Excludes:insulator, washer and thrust type washers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15934 | A022B0 | 1 | 1 |
Specifications
Hole Diameter
0.689 inches minimum and 0.691 inches maximum
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Shoulder Diameter
1.0615 inches minimum and 1.0635 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Outside Diameter
1.175 inches minimum and 1.185 inches maximum
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Shoulder Height
0.042 inches minimum and 0.052 inches maximum
Details
None.Material Thickness
0.068 inches minimum and 0.088 inches maximum
Details
A measurement of the smallest dimension of the material,in distinction from length or width.Criticality Code Justification
aavh
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Surface Finish
32.0 microinches bottom
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
32.0 microinches inner
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
32.0 microinches top
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Material
aluminum overall and copper alloy overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-b-679,/cancelled/ fed spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
oxide film overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-c-5541 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
shouldered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81205-114h4049 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 114H4049-1 | 33068 | 5 | - | 5 | 9 | - | ZZ |
| 114H4049-1 | 27541 | 5 | - | 5 | 9 | - | ZZ |
| 114H4049-1 | 81205 | 5 | - | 5 | 2 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 95100 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified sales team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
FAQs
Frequently asked questions for NSN 5310-00-073-6601
What is the NIIN of the NSN 5310-00-073-6601?
The National Item Identification Number (NIIN) of the NSN 5310-00-073-6601 is 00-073-6601
When the NSN 5310-00-073-6601 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 5310-00-073-6601 contain any precious metals?
Type/content is unknown
Does the NSN 5310-00-073-6601 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products