Recessed Washer
750279-1
0.335 inches minimum and 0.338 inches maximum hole diameter, 0.500 inches nominal outside diameter, 0.420 inches minimum and 0.440 inches maximum recess diameter, 0.102 inches minimum and 0.108 inches maximum material thickness, 80.0 degrees minimum and 84.0 degrees maximum recess angle, steel comp 303 overall material
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes:washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15933 | A022B0 | 1 | 1 |
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Details
The length of a straight line which passes through the center of the recess,and terminates at the circumference.Details
A measurement of the smallest dimension of the material,in distinction from length or width.Details
None.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 55210 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified sales team
- Counterfeit Parts Prevention
- 100% Product Inspections
What is the NIIN of the NSN 5310-00-241-6646?
When the NSN 5310-00-241-6646 was assigned to the Federal Catalog?
Does the NSN 5310-00-241-6646 contain any precious metals?
Does the NSN 5310-00-241-6646 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.