Close Tolerance Screw

NAS1132V2

(NSN) National Stock Number

5305-00-083-1816

Federal Supply Classification

5305 Screws

Item Name Code

29294

Schedule B Code

8109900000

Summary

3a thread class, right-hand thread direction, 0.251 inches minimum and 0.301 inches maximum thread length, 0.386 inches minimum and 0.416 inches maximum fastener length, pan head style, 0.306 inches minimum and 0.322 inches maximum head diameter

DAC	HCC	DMIL	RNCC
4	-	-	C

RNVC	SADC	MSDS	RNAAC
1	9F	-	ZZ

Identification

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

INC	FIIG	Concept	Condition
29294	A003B0	-	1

Specifications

Thread Class

Details

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction

right-hand

Details

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

Thread Length

0.251 inches minimum and 0.301 inches maximum

Details

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

Fastener Length

0.386 inches minimum and 0.416 inches maximum

Details

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

Head Style

pan

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Head Diameter

0.306 inches minimum and 0.322 inches maximum

Details

The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

Head Height

0.105 inches minimum and 0.115 inches maximum

Details

A measurement from the bottom to the top of the head,in distinction from depth.

Grip Diameter

0.1625 inches minimum and 0.1635 inches maximum

Details

The length of a straight line which passes through the center of the grip,and terminates at the circumference.

Internal Drive Style

offset cruciform (torque set)

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

Nominal Thread Diameter

0.164 inches

Details

The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

Grip Length

0.115 inches minimum and 0.135 inches maximum

Details

A measurement of the longest dimension of the grip,in distinction from width.

Thread Quantity Per Inch

Details

The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Minimum Tensile Strength

160000 pounds per square inch

Details

The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

Surface Finish

32.0 microinches bearing surface of head

Details

Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.

Surface Finish

32.0 microinches grip

Details

Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.

Surface Finish

32.0 microinches threads

Details

Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.

Material

titanium alloy overall

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

ams4967,comp 6al-4v assn std single material response overall

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Thread Series Designator

unjc

Details

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

Specification/Standard Data

80205-nas1132 professional/industrial association standard

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
NAS1132V2	L4528	4	-	3	2	-	ZZ
NAS1132V2	07851	4	-	5	2	-	KZ
NAS1132V2	58998	4	-	3	2	-	KZ
NAS1132V2	80539	4	-	3	2	-	KZ
NAS1132V2	73197	4	-	3	2	-	KZ
NAS1132V2	92215	4	-	3	2	-	KZ
VT1011V08-2	92215	5	-	C	1	-	ZZ
NAS1132V2	30902	4	-	5	9	-	KZ
NAS1132V2	04348	4	-	5	9	-	KZ
NAS1132V2	97928	4	-	5	9	-	KZ
NAS1132V2	08938	4	-	5	9	-	KZ
NAS1132V2	56878	4	-	5	9	-	KZ
NAS1132V2	53606	4	-	5	2	-	KZ
NAS1132V2	50568	4	-	3	2	-	KZ
NAS1132V2	80205	4	-	3	2	-	KZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
68455	-	W	-

RVC	WCC	TCC	SHC
-	713	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

ISO9001 / AS9100 Quality Standards
HAZMAT Certified
On Time Delivery
Qualified sales team
Counterfeit Parts Prevention
100% Product Inspections

Manufacturer

HUCK INTERNATIONAL, INC

CAGE: 17446

CARSON , CA , 90745-4201

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5305-00-083-1816

What is the NIIN of the NSN 5305-00-083-1816?

The National Item Identification Number (NIIN) of the NSN 5305-00-083-1816 is 00-083-1816

When the NSN 5305-00-083-1816 was assigned to the Federal Catalog?

It was assigned 62 years ago, on Tue, Jan 1, 1963

Does the NSN 5305-00-083-1816 contain any precious metals?

Type/content is unknown

Does the NSN 5305-00-083-1816 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.